The Ford F150 is the most well-liked truck sold by Ford. It is considered a heavy-responsibility truck, meant for hauling and towing. Because of this, it needs to be no surprise that over time, it can accumulate its fair share of dings and dents. Stone chips in windshields are widespread among automobiles which might be used for hauling, towing and different heavy-duty applications. Nonetheless, when a stone chip turns right into a crack, it might be time to replace all the windshield before it spreads, shatters and makes a large number all around the inside of the truck. As soon as the Windshield has been removed, you may have to know how one can install a windshield in a Ford F150 properly so that it seals.
Ford F-150 Windshield Installation Instructions
1. Clear up any residual urethane after eradicating the previous windshield with a razor blade. Lower the previous urethane down to roughly three mm.
2. Clear the pinchweld area on the F150 the place the new windshield will probably be installed. Gently brush the area with a cleansing brush. Use water and clear rags to dry the area.
3. Coat the frit band with urethane primer. The frit band is the black strip-edge operating across the perimeter. The band needs to be activated to open up the pores in order that the urethane can adhere to the glass.
4. Run a bead of urethane into the pinchweld space on the Ford F150 where the windshield will probably be positioned utilizing an electric caulk gun.
5. Align the highest, bottom and sides of the windshield and press the windshield into place.
